Postural assessment,
as a clinical tool
FramIQ Pro turns bike fitting into a reproducible clinical act: measure anthropometry and video, recommend through biomechanical engines, follow each patient over time.
Clinical rigour,
at last in bike fitting.
Where fitting is so often done by feel, FramIQ Pro sets down a measurement, a recommendation and a follow-up: measured, on-device and reproducible, session after session.
Objective measurement
Guided anthropometry, and joint angles read by video pose detection.
On-device computation
The biomechanical engines run on the device: the calculation depends on no server.
10,000+ frames
Compare reach / stack against the geometry database to guide the choice.
Recorded follow-up
Patients and sessions kept, comparable from one visit to the next.
Full-width photo · cyclist in position / practiceThree stages, one tool.
From anthropometry to the report handed to the patient, everything happens in a single app, built for the tempo of a session.
Measure, frame by frame
Anthropometry is taken in the practice, guided field by field: inseam, torso, arm, sit-bone width. Video does the rest, with pose detection reading the joint angles straight off the pedalling motion: knee at extension, hip, trunk, elbow.
Recommend, with the figures to back it
The biomechanical engines cross your measurements with the patient's discipline and goal: saddle height and setback, target reach and stack, saddle choice, cleat rotation and setback. Every value is computed on the device, so you see the figure and the reasoning behind it, never a black box.
Follow up, session after session
Every session is recorded in the patient's file: position, angles, settings and observations. From one visit to the next you compare, you make the progress measurable, and you hand over a clear report. Invoicing follows, in the same tool.
iPhone screen · guided anthropometryiPhone screen · engine recommendationiPhone screen · follow-up and historyWhat makes the difference.
Built by a clinician
Designed by an osteopath D.O. who practises bike fitting, not by a generalist software house.
Local and transparent computation
You see the figures and the logic behind them, never an opaque score.
All in one
From measurement to recommendation, from the patient record to invoicing, in a single tool.
Beyond the fit
Frame search across 10,000+ geometries and an aero module with CdA estimation, both rare in this kind of tool.
FramIQ Pro is the professional tool derived from the FramIQ app, rated 5 out of 5 on the French App Store, from 7 reviews, as of 23 September 2026.
Why FramIQ?
What a clinical measurement tool changes, set against eyeballing or a one-off traditional fitting.
| Criterion | FramIQ ProPractice tool | EyeballingBy feel | Traditional fittingCase by case |
|---|---|---|---|
| Angles measured frame by frame | Yes | No | Variable |
| Reproducible recommendations | Yes | No | Depends on the fitter |
| Comparison across 10,000+ geometries | Yes | No | No |
| Patient history tracking | Yes | No | Paper |
| Local and transparent computation | Yes | No | Black box |
| Multi-discipline (road, MTB, gravel, tri) | Yes | No | Specialised |
| Clinical examination: palpation, mobility, history | No | No | Yes |
| Setup time | 10 min | Immediate | 1 to 2 h |
| Atypical case: past injury, marked asymmetry | Measures, does not decide | No | The fitter’s eye |
FramIQ Pro measures. It replaces neither the clinical examination nor the fitter’s judgement: it gives them numbers instead of an impression.
Frequently asked questions
What is FramIQ Pro?
FramIQ Pro is postural assessment (bike fitting) software for practitioners, on iPhone and iPad. It measures, recommends and follows up on every patient.
Who is it for?
Osteopaths, physiotherapists, bike fitters, shops and teams who carry out bike fitting sessions.
How does it differ from the FramIQ app?
FramIQ Pro adds patient records, invoicing, GDPR consent, advanced calculation engines and the aero module. The FramIQ app is aimed at the rider.
Do I need any particular equipment?
A recent iPhone or iPad is enough to measure and film. You will need a stable camera mount and a home trainer or rollers, since pose detection reads the pedalling movement. Anthropometry can be typed in or photographed.
How long does a session take?
Setting up takes about ten minutes: position the bike, mount the camera, enter the anthropometry. After that the pace is yours. FramIQ Pro does not shorten your session, it removes the time spent calculating and copying figures out.
Where is my patient data hosted?
The calculation engines run on the device: no measurement needs a server to be usable. Patient records are synchronised to servers located in the European Union, in Amsterdam, and GDPR consent is built into the workflow. The detail is in the privacy policy.
Do I need to already practise bike fitting?
FramIQ Pro is a measuring tool, not a course. It guides measurement field by field and explains every recommendation, but it assumes you know how to question and examine a patient: your clinical examination decides, not the software.
Which devices, and how do I get it?
On iPhone and iPad. The app downloads freely from the App Store, but it only works with a practice licence: without one, nothing is accessible. The licence is issued after a demo, where we go through a real case from your own practice.
How much does FramIQ Pro cost?
It is an annual subscription per practice, priced on the number of practitioners. The exact figure, and the launch terms currently running, are given during the demo.
Measure, recommend, follow up.
Run a demo on your own hardware, with your own cases, and start your first session.